When the profiles according to the transport direction of movement, the glue has been decorative materials through the pressure roller, forming wheel by-point rolling, to achieve the two composite work.

Universal cover machine cover manufacturers

Universal covering machine for wood, aluminum profiles, foam materials and other lines posted on the surface of PVC, decorative paint, real wood skin production. Instead of the traditional paint technology for door line, baseboard, gusset, curtain rods, windowsill, aluminum doors and windows, photo frames and other surface-covered production.

working principle

Using a variety of molding pressure wheel, imitation manual veneer action, the surface decoration material attached to the substrate surface, the general choice of profile centerline or the highest point or the lowest point as a starting point, the pressure roller profile along the profile, point by point, The positions are fixed in sequence to form the contour of the profile.

Cladding machine manufacturer cladding material

1, substrate: wood lines, MDF, wood, plastic, PVC, aluminum profiles and other lines. Substrate requirements: the rules of the line profile, can have grooves, surfaces, but each point must be straight for the longitudinal direction, a certain pressure resistance, the length is generally 40 cm or more to infinity.

2, veneer material: PVC decorative film, decorative paper, wood veneer, Boeing board, composite aluminum film. Width according to the substrate needs and selected models to determine, usually 50 cm below.

Such as 300 Universal Coverage most wide film width of 30 cm. General roll use. Currently on the market there are 100 cm wide profile. But the solid wood veneer can also be a single sheet, solid wood veneer generally with a non-woven bottom, non-woven non-surface material can not gel, and easy to break in the corner.