<strike id="eaya8"></strike>
Service Hotline：
0510-88700553/88707301
Covering machine working principle is not complicated, through a variety of forming pressure roller will be covered in the surface of the substrate decorative materials to simulate hand-covering process, the substrate covering operations. U...
When the profiles according to the transport direction of movement, the glue has been decorative materials through the pressure roller, forming wheel by-point rolling, to achieve the two composite work. Universal cover machine cover manufac...
What kind of machine is the wrapping machine? Many people are very skeptical about this issue, but also full of interest, the use of high value wrapping machine, we also need a good understanding. In fact, in todays production, the coverage...
1, covering the working principle of the machine: Simulation of manual veneer action, using a variety of molding pressure wheel. The appearance of decorative materials attached to the surface of the substrate, the general choice of profile...
We use the process must pay attention to the operation of the person must follow the following operation flow, to the correct operation of the coating machine. In order to avoid damage to the coating machine, resulting in failure can not wo...
PUR Cladding Machine with a stable overall body and sophisticated delivery system, after ex-factory carefully adjusted, the working speed can reach 20-60 m / min, its high efficiency, fast, stable operation, to achieve Domestic advanced lev...
Cladding machine installation: 1, to determine the local operator 2-3, the equipment should be installed in a clean environment, the ground level of the workshop. Equipment in place, remove the attachment on the machine, packing list invent...
Cladding machine is a kind of machine which has been widely used instead of the traditional paint technology in the past. However, as every kind of machine, it also has its service life, and some people do not pay attention to maintenance A...
The problems that should be paid attention to in the production process of coating machine 1, check the density of the board and Lou milling quality. The poor quality of the board, engraving and milling the bottom hair, resulting in the pro...
Copyright ◎ 2016 yudajixie.com Wuxi Yuda Light Industry Machinery Factory All rights reserved suICP12031851suICP12031851
<strike id="we6a4"></strike>
